| Table Dia (mm/inch) | 250 / 9.84
|
|---|
| Center Height in Vertical (mm / inch) | 185 / 7.28
|
|---|
| Table Height in Horizontal (mm / inch) | 200 / 7.87
|
|---|
| Over all Height in Vertical Without Motor Cover (mm / inch) | 315 / 12.4
|
|---|
| Thru-Hole Dia (mm / inch) | 70H7 / 2.75H7
|
|---|
| Width of T-slot (mm / inch) | 12H7 / 0.47H7
|
|---|
| Width of Guide Block (mm / inch) | 18h7 / 0.71h7
|
|---|
| Servo motor type (MELDAS) | HF-104T / HF-154T
|
|---|
| Servo motor type (FANUC) | α4 i / α8 i
|
|---|
| Servo motor type (SIEMENS) | 1FK7060 / 1FK7063
|
|---|
| Servo motor type (HEIDENHAIN) | QSY116C / QSY116E
|
|---|
| Gear Ratio | 1:180/1:90
|
|---|
| Min. Indexing Unit degree (degree) | 0.001°
|
|---|
| Max. R.P.M. (rpm) (motor : 2000 / rpm) | 11.1/22.2
|
|---|
| Pneu. clamp force (kg•m) (P:5kg / cm2 ) | 47
|
|---|
| Hydro. clamp force (kg•m) (P:20kg / cm2 ) | 94
|
|---|
| Indexing Accuracy Class (sec.) | 15"
|
|---|
| Repeatability (sec.) Unidirectional | 4"
|
|---|
| Repeatability (sec.) Bidirectional | 8"
|
|---|
| Max. Machining Force (kg•m) | 45
|
|---|
| N.W. (kgs) | 124
|
|---|
|
Reviews
There are no reviews yet.