| Table Dia (mm/inch) | 120 / 4.72 |
|---|---|
| Center Height in Vertical (mm / inch) | 115 / 4.53 |
| Table Height in Horizontal (mm / inch) | 170 / 6.69 |
| Over all Height in Vertical Without Motor Cover (mm / inch) | 193 / 7.60 |
| Thru-Hole Dia (mm / inch) | 30H7 / 1.18H7 |
| Width of T-slot (mm / inch) | 10H7 / 0.39H7 |
| Width of Guide Block (mm / inch) | 14h7 / 0.55h7 |
| Servo motor type (MELDAS) | HF-75T |
| Servo motor type (FANUC) | α2 i |
| Servo motor type (SIEMENS) | 1FK7042 |
| Servo motor type (HEIDENHAIN) | QSY96G |
| Gear Ratio | 1:60 |
| Min. Indexing Unit degree (degree) | 0.001° |
| Max. R.P.M. (rpm) (motor : 2000 / rpm) | 33.3 |
| Pneu. clamp force (kg•m) (P:5kg / cm2 ) | 12 |
| Hydro. clamp force (kg•m) (P:20kg / cm2 ) | 24 |
| Indexing Accuracy Class (sec.) | High Accuracy Rotary Table Refer to P59 chart 2 |
| Repeatability (sec.) Unidirectional | 4" |
| Repeatability (sec.) Bidirectional | 8" |
| Max. Machining Force (kg•m) | 12 |
| N.W. (kgs) | 28 |
نقد و بررسیها
هنوز بررسیای ثبت نشده است.