| Tailstock quill taper | MT4# |
|---|---|
| X/Y/Z axes ball screw pitch | 10 mm |
| Positioning accuracy(X/Z) | 0.008/1000 mm |
| Standard turning dia. | Φ300(12’’ chuck*) mm |
| Chuck size | 8’’(10’’*,12’’*) |
| Max. swing dia. over bed | Φ560 mm |
| Max. swing dia. over slide | Φ300 mm |
| Spindle bore | Φ66(Φ86*) mm |
| Spindle end type | A2-6(A2-8*) |
| Max. bar through dia. (mm) | 51(74*) mm |
| Main spindle motor power | 11(15*) kw |
| Tool turret type | 12T Hydraulic-servo tool turret |
| Toolshank size | 25×25, Φ40 mm |
| Tailstock quill dia./travel | Φ80/80 mm |
| Repeat positioning accuracy(X/Z) | ≤0.005 mm |
| Overall size | 2600×1800×1900 mm |
| N.W. | 4000 kg |
| X axes travel | 230 mm |
| Z axes travel | 610 mm |
| X/Z axes rapid moving speed | 24/24 m/min |
| X/Y/Z axes linear guideway type | BALL type |
| X/Y/Z axes linear guideway width | 45/30/45 mm |
| X/Y/Z axes ball screw O.D. | Φ32/Φ32/Φ40 mm |
| MAX.TURNING DIAMETER (BL) | Φ400 mm |
| MAX.TURNING LENGTH (BL) | 485(8’’ chuck); |
| SPINDLE SPEED (rpm) | 4000(3500*) rpm |
نقد و بررسیها
هنوز بررسیای ثبت نشده است.