| Min. Indexing Unit degree (degree) | 0.001° |
|---|---|
| Indexing Accuracy Class (sec.) | A |
| Repeatability (sec.) Unidirectional | 4" |
| Repeatability (sec.) Bidirectional | 8" |
| Width of Guide Block (mm / inch) | 18h7 / 0.71h7 |
| Table Dia (mm/inch) | 500 / 19.69 |
| Center Height in Vertical (mm / inch) | 310 /12.20 |
| Table Height in Horizontal (mm / inch) | 290 / 11.42 |
| Over all Height in Vertical Without Motor Cover (mm / inch) | 570 / 22.44 |
| Thru-Hole Dia (mm / inch) | 180H7/ 7.09H7 |
| Width of T-slot (mm / inch) | 18H7/ 0.71H7 |
| Servo motor type (MELDAS) | HF-204S / HF-354S |
| Servo motor type (FANUC) | α12 i / α22 i |
| Servo motor type (SIEMENS) | 1FK7083 / 1FK7101 |
| Servo motor type (HEIDENHAIN) | QSY155F |
| Gear Ratio | 1:120 |
| Max. R.P.M. (rpm) (motor : 2000 / rpm) | 16.7 |
| Pneu. clamp force (kg•m) (P:5kg / cm2 ) | 160 |
| Hydro. clamp force (kg•m) (P:20kg / cm2 ) | 380 |
| Max. Machining Force (kg•m) | 230 |
| N.W. (kgs) | 480 |
نقد و بررسیها
هنوز بررسیای ثبت نشده است.